近年来，泡沫复合板的使用普遍，给人们带来了严重的损失。因此，在选择泡沫复合板时，一定要选择正规渠道购买，并严格按照防火要求建造，选择泡沫复合板。在此过程中应注意以下几点：

In recent years, the use of foam composite board is widespread, which has brought serious losses to people. Therefore, when choosing foam composite board, we must choose regular channels to purchase, and build it in strict accordance with the fire prevention requirements, and choose foam composite board. In this process, the following points should be noted:

选用优质的泡沫复合板原材料，从根本上保证泡沫复合板的产品质量。购买高档泡沫复合板严格按照防火要求购买，不要贪便宜不关注泡沫复合板芯材的防火性能和防火等级

Select high-quality foam composite board raw materials to fundamentally ensure the product quality of foam composite board. Purchase high-grade foam composite board in strict accordance with the fire protection requirements. Don't be greedy and don't pay attention to the fire performance and fire rating of foam composite board core materials

在泡沫复合板的交付和安装过程中，仔细检查板的质量和平整度，避免因板的质量造成工程安全隐患。通过正规渠道购买泡沫复合板，并向生产厂家索取消防部门出具的产品防火测试报告。

During the delivery and installation of foam composite board, carefully check the quality and flatness of the board to avoid potential safety hazards caused by the quality of the board. Purchase foam composite board through regular channels and ask the manufacturer for the product fire test report issued by the fire department.

定期检查泡沫复合板的使用是否有损坏，并对泡沫复合板进行后期维护，避免泡沫复合板面板漆层剥落而影响芯材性能。

Regularly check whether the foam composite board is damaged during use, and carry out post maintenance on the foam composite board to prevent the foam composite board panel paint from peeling off and affecting the core material performance.

由于其特殊的结构，泡沫复合板具有很高的抗压能力和抗冲击能力，可以承受各种系统的地面荷载和其他领域。

Due to its special structure, foam composite board has high compressive and impact resistance, and can withstand ground loads of various systems and other fields.

如果保温板为济南泡沫复合板，应在涂有粘结胶的一面涂上专用界面剂，待其干燥20分钟后再使用。泡沫复合板一般应水平铺设，自下而上，交错缝宽为板长1/2，必要时适当裁切，尺寸偏差不大于±1.5mm。

If the insulation board is Jinan foam composite board, the side coated with adhesive shall be coated with special interface agent, which shall be used after it is dried for 20 minutes. Generally, the foam composite board shall be laid horizontally from bottom to top, and the staggered seam width shall be 1/2 of the board length. If necessary, it shall be cut appropriately, and the size deviation shall not be greater than ± 1.5mm.

当基墙平整度好时，也可用条贴法，将涂胶的泡沫复合板立即贴在墙上，滑动到位，用2米尺压平，确保它的平整度和粘贴牢固。

When the flatness of the foundation wall is good, the strip pasting method can also be used to paste the glued foam composite board on the wall immediately, slide it in place, and flatten it with a 2m ruler to ensure its flatness and firm pasting.

板间间隙不应大于2mm，板间高度差不应大于1.5mm。当板间间隙大于2mm时，接缝处应填上绝缘条，板条不得粘胶或使用。接缝处直接用粘合剂填满，板间高差大于1.5mm的部位应抹平。

The gap between plates shall not be greater than 2mm, and the height difference between plates shall not be greater than 1.5mm. When the gap between plates is greater than 2mm, the joint shall be filled with insulating strip, and the strip shall not be glued or used. The joints shall be directly filled with adhesive, and the parts with height difference between plates greater than 1.5mm shall be troweled.

所有门、窗、孔的拐角处不得有拼接缝，必须用一整块保温板切割成型，板缝与拐角的距离不小于200mm。在所有阴阳角的拐角处，必须采用交错缝合的方法，并按照垂直线用尺子控制偏差，并用90°尺子检查。

The corners of all doors, windows and holes shall be free of splicing joints, which must be cut and formed with a whole thermal insulation board, and the distance between the board joint and the corner shall not be less than 200mm. At the corners of all internal and external corners, the method of staggered stitching must be adopted, and the deviation must be controlled with a ruler according to the vertical line, and checked with a 90 ° ruler.

要从产品质量上杜绝安全隐患，后期的使用过程中进行维护检修及时发生隐患！更多相关内容您可以关注网站www.hhqhq.com，联系我们专业的客服人员进行咨询。

We should eliminate potential safety hazards from product quality, and carry out maintenance and repair in the later use process, so as to avoid potential hazards in time! For more information, you can follow the website www.hhqhq.com COM, contact our professional customer service personnel for consultation.